Skip to main content
Loading…
This section is included in your selections.

Click here to view prior versions of this section.

In the industrial districts, the regulations and standards of this Section shall apply:

A. Billboards. Not allowed.

B. Off-premises signs in Industrial Parks.

1. Type of Sign: Monument sign.

2. Allowable Areas: Maximum 32 square feet per face per sign. Maximum of 64 square feet total all sign faces.

3. Number of Signs: 1 per business and copy must be related to the resident manufacturers or industries, and for directional purposes only (not allowed in the Industrial Districts along Lincoln Avenue, south of Fourth Plain Boulevard and east of the railroad tracks).

4. Height of Sign: Maximum 15 feet.

5. Encroachment: Not allowed.

6. Portable signs in the right-of-way as per 20.960.090.

C. Free-standing signs (on-site monument sign only).

1. Allowable Area: One (1) square foot per face per lineal foot of frontage up to a maximum of 250 square feet per face. Provided that premises with less than thirty-two (32) lineal feet of frontage shall be allowed a maximum thirty-two (32) square foot sign per face.

2. Number of Signs: 1 per frontage.

3. Height of Sign: Maximum 15 feet.

4. Encroachment: No part of the freestanding sign shall project into any public right-of-way.

5. No freestanding sign shall project or extend into any vision clearance area unless approved by the Planning Official.

6. Any freestanding sign must be integrated. That is, all supports or sign elements shall be an integral part of the design. Auxiliary projections or attachments not a part of a single design are prohibited.

D. Fascia signs.

1. Allowable Area: Maximum 12 percent of the building’s elevation on which the sign is erected with a guaranteed minimum of 32 square feet. Total of all sign areas shall not exceed 250 square feet.

2. Number of Signs: No maximum number, provided the total area of all signs complies with D1 above.

3. Height of Sign: No sign shall extend above parapet or eave line.

4. Fascia Signs: Fascia Signs may not encroach into right-of-way if less than 8 feet above grade.

E. Projecting signs.

1. Allowable Area: Maximum 15 percent of a building elevation on which the sign is erected. Total of all sign face areas shall not exceed 250 square feet.

2. Number of Signs: 1 per elevation per business.

3. Height of Sign: No sign shall extend above parapet or eave line.

4. Encroachment: Above Public Right-of-Way: No encroachment allowed for signs less than 8 feet above grade; 3 feet encroachment allowed for signs greater than 8 feet but less than or equal to 10 feet above grade; 4 feet encroachment allowed for signs greater than 10 feet and less than or equal to 12 feet above grade, and 6 feet for signs more than 12 feet above grade.

F. Rooftop signs. Not allowed.

G. Temporary signs. Not allowed except as provided in 20.960.090.

H. Rotating signs. Not allowed.

I. Electronic message centers signs.

1. The area of the electronic message center shall not exceed 20 percent of the area of the sign; provided the area limitation shall not apply if the sign is solely limited to time and temperature.

2. All messages displayed on an electronic message center shall be directly related to the business for which the sign was constructed. No off-premises signage is permitted.

3. All electronic message centers signs shall be constructed as an integral part of a permanent sign constructed on site. Integral shall be considered to be incorporated into the framework and architectural design of the permanent sign.

4. The display shall be limited to text and static images only and shall not appear to flash, portray blinking or chasing lights, or otherwise create continuously changing images. However, scrolling of text (horizontal or vertical) is permitted. The rate of change for sign copy from one message to another shall be no more frequent than every eight seconds and the actual copy change shall be accomplished in four seconds or less. Once changed, the copy shall remain static until the next change.

5. All electronic message center signs shall have installed ambient light monitors and shall at all times allow such monitors to automatically adjust the brightness level of the electronic message center sign based on ambient light conditions.

6. Electronic message center signs shall not be associated with any dwelling or home occupation in any residential zone.

7. Electronic message center signs which create a source of glare shall be adjusted or removed as directed by the Planning Official. No electronic message center sign may be illuminated to a degree of brightness that is greater than necessary for adequate visibility. In no case may the brightness exceed eight thousand nits (8,000) or equivalent candelas during daylight hours, or one thousand (1,000) nits or equivalent candelas between dusk and dawn.

8. Electronic message center sign permit applications must also include a certification from the owner or operator of the sign stating that the sign shall at all times be operated in accordance with City codes and that the owner or operator shall provide proof of such conformance upon request of the City.

J. Directional signs.

1. Allowable Area: Maximum 10 square feet per face per sign.

2. Number of Signs: 1 per function per frontage.

K. Industrial complex signs (free-standing signs).

1. Allowable Area: 1.5 square foot per face per lineal foot of industrial complex frontage up to a maximum of 250 square feet per face. Provided that an industrial complex with less than thirty-two (32) lineal feet of frontage shall be allowed a maximum thirty-two (32) square foot sign per face.

2. Number of Signs: 1 per complex frontage.

3. Height of Sign: Maximum 25 feet.

L. Allowable combinations of sign types.

1. No signs attached to the building will exceed a total of 15 percent of said building elevation.

2. On any frontage, these combinations are allowable:

a. Fascia and Free-Standing Signs.

b. Fascia and Projecting Signs

c. No other combinations allowed. (Ord. M-4147, 2015; Ord. M-3868 § 9, 02/25/2008; Ord. M-3643, 01/26/2004)

Code reviser’s note: Ord. M-4147, Amended, 12/07/2015, Effective 01/07/2016 ACM Correction.