Click here to view prior versions of this section.
A. CX, CC, CG and HX Zones. The following special use limitations apply:
1. Artisan and Specialty Goods Production Uses.
a. The artisan and specialty goods production structure shall not encompass more than 10,000 square feet of area. The 10,000 square feet total shall include all storage areas associated with the manufacturing operation. These types of uses are limited in size to assure that they will not dominate the commercial area and to limit the potential impacts on residential and commercial uses. Upon application the planning official may increase the square feet of area by no more than 20 percent if it is determined that the additional area will not adversely impact neighboring uses and improvements, and will be consistent with the intent of the zoning district.
b. All activities except loading shall occur within buildings; outdoor storage/repair is prohibited.
c. All artisan and specialty goods production uses are required to accommodate public viewing or a customer service space as defined below.
i. Public viewing shall be accomplished with windows or glass doors covering at least 25 percent of the front of the building face abutting the street or indoor lobby wall, allowing direct views of manufacturing; openings between the display or lobby area and manufacturing/work space may be reduced below 25 percent where fire rated separation requirements restrict opening size as determined by the planning official; or
ii. A customer service space includes a showroom, tasting room, restaurant, or retail space.
d. Drive-through facilities are prohibited. (Ord. M-4341 § 3 (Exh. B), 2021; Ord. M-4325 § 3, 2020; Ord. M-3832 § 8, 2007; Ord. M-3730 § 21, 2005; Ord. M-3643, 2004)